Cement Compression Frame

£1

Clear selection
Cement Compression Frame

The TCM-6700 and TCM-6710, very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimens. Load cells are used on both frames to provide high accuracy in load measuring.
Both frames are fitted with round platens with 165 mm diameter and these should be used together with suitable flexure and compression devices. Distance pieces and transparent front-rear safety doors (should be factory installed) should be ordered separately.

Platens

Manufactured from high quality steel are hardened (more than HRC 53), smoothed and finished. The roughness value for the surface texture of machine and auxiliary platens is 3.2 μm.

Loading Cylinder Assembly and Limit Switch

All frames have a single acting up stroking ram. The diameter of piston changes with regard to the capacity. The maximum ram stroke is 50 mm, a limit switch is fitted to prevent over travel of the ram which cuts the power to the pump.There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder

Distance Pieces for Frame

Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the distance between platens.

Standards

  • EN 196-1
  • EN 459-2
  • EN 1015-11
  • EN 13454-2
  • ASTM C109
  • ASTM C348
  • ASTM C349
  • BS 3892-1
  • BS 4551-1

  • Model TCM-6700 TCM-6710
    A 460 mm 680 mm
    B 300 mm 300 mm
    C Ø165 mm Ø165 mm
    D 263 mm 263 mm
    E 500 mm 500 mm
    F 1650 mm 1650 mm
    Weight Kg 180 325

    Concrete Compression Testing Frames


    TC-4630 Distance piece dia. 165 mm x 15 mm
    TC-4631 Distance piece dia. 165 mm x 30 mm
    TC-4633 Distance piece dia. 165 mm x 50 mm
    TC-4634 Distance piece dia. 165 mm x 90 mm


    TCM-0120/A
    Flexure Jig Assembly to test 40 x 40 x 160 mm mortar prisms, ASTM
    TCM-0120/E
    Flexure Jig Assembly to test 40 x 40 x 160 mm mortar prisms, EN
    TCM-0121/A
    Compression Jig Assembly to test 50 mm (2”) mortar cubes, ASTM
    TCM-0121/E
    Compression Jig Assembly to test portions of 40 x 40 x 160 mm mortar prisms, EN
    Please complete the form below to download the datasheet


    Name*

    Email*

    Telephone*

    Company*

    Country*