Ductility Test Machine

£5

Clear selection
Ductility Test Machine

The TAS-0400 Ductility Testing Machine is used to determine the ductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 3 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature. Each machine comprises of speed control and water circulator to maintain the homogeneous water temperature. The TAS-0420 Ductility Testing Machine with Cooling Unit has the same specifications as TAS-0400 Ductility Testing Machine, but comes with a fitted cooling unit. It is not possible to convert TAS-0400 to TAS-0420.
TAS-0430 Force Ductility Testing Machine has 3 load cells. The accuracy of load cells are ±0,1N with a maximum capacity of 300 N. TAS-0430 has a cooling unit, and is equipped with BC 100 TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure conditions can be downloaded to the Unit. Speed can be set and load-displacement curves are drawn through the software.

  • Elongation measurement through motor encoder.
  • 3 simultaneous load measurements with 18 bit resolution
  • Speed control with servo AC motor between 0,01 to 100 mm/min.
  • Ethernet connection for computer interface
  • Moulds and mould base plates should be ordered separately for all machines.

    Standards

    TAS-0400 and TAS-0420:

  • EN 13398
  • ASTM D113
  • ASTM D6084
  • AASHTO T51
  • TAS-0430:

  • EN 13589
  • EN 13398
  • EN 13703
  • ASTM D113
  • ASTM D6084
  • AASHTO T51
  • AASHTO T300



  • Dimensions (wxlxh) mm 300 x 1850 x 550
    Power 1000 W
    Weight Kg 80

    Accessories are not included in the price of main device (unless stated otherwise) and may be purchased separately if required.

    TAS-0402 Ductility Briquette Mould, ASTM D113 and AASHTO T51
    TAS-0404 Ductility Mould Base Plate
    TAS-0406 Ductility Mould, ASTM D6084, AASHTO T300 and EN13589 (force measurement ), Brass
    TAS-0408 Ductility Mould, EN 13398

    Please complete the form below to download the datasheet


    Name*

    Email*

    Telephone*

    Company*

    Country*