Translate this page into English Translate this page into French Spanish translation does not exist for this page Chinese translation does not exist for this page
Information about Asphalt Rolling Thin Film Oven
Accessories for Asphalt Rolling Thin Film Oven
Specifications for Asphalt Rolling Thin Film Oven
Information PDF's for Asphalt Rolling Thin Film Oven

Asphalt Rolling Thin Film Oven

Interior Chamber Dimension

381mm high x 483mm wide x 445 deep

Approximate External Dimension

855mm high x 900mm wide x 800mm deep

Normal Working Temperature Range

50° to 200° C

Max. Operating Temperature

200°C

Temperature Stability

Better than ±0.5°C under steady state conditions.

Temperature Sensor

Type "K" Mineral insulated Thermocouple.

Temperature Control

Eurotherm 2132 digital three term controller.

Power Control

Thyristor based solid state relay working in the fast cycle zero voltage switching mode.

Over-temperature Protection

Eurotherm 2132 digital on/off controller and separate safety contactor.

Air Circulation

Forced air circulation by top mounted fan and air guide system.

Location of Controls

All controls mounted in a control cabinet on side of the oven.

Interior Chamber Material

Grade 430 dull polished ferritic stainless steel.

Exterior Material and Finish

Zinc coated mild steel sheet finished with dark grey stoved epoxy powder paint.

Thermal Insulation

High quality mineral wool blanket.

Power Requirement

Total heating power is 3.0kW

Power Supply Required

220/240volts single phase  50Hz.

Chamber Access

Single side hinged door at the front fitted with a double glazed window 305mm x 229mm